Easy DMX 30CH LED RGB Controller,decoder and led dmx driver, Austraia,Russia, Amerinca popular,brand new

Easy DMX 30CH LED RGB Controller,decorder and led dmx driver

Welcome to buy our 30CH constant dmx decoder, which take advantage of advanced microelectronic control technology. This technology changes the international fashion DMX512/1990 standard digital control signals into analog control signals. There are 1 ~ 30 output channels; each channel can be achieved 256 control levels. This constant decoder is used when DMX512 control equipment control general LED lighting.


30CH DMX Decoder 22light guide

Products Performance:

Input Power:  DC9V-DC24V

Maximum load current:  1A/CH×30

Maximum power load: 360W (12V) 720W (24V)

Output gray level: 256

Input Signal:  DMX512/1990

Output signal:  30 channels Constant PWM

Output DMX :  30 channels

standard XLR-3 caron plug

Size:  L225*W80*H32

Gross Weight: 320g

Basic functions:

There are 30 output channels, can connect with single or RGB lamps

0-100% dimming output, each channel 256 gray levels

International standard DMX512 input protocol, address code set by DIP switches;

Wide voltage DC input DC9V ~ DC24V;

Each occupied by 30 DMX address.

The decoder comes with 16 kinds of test patterns, 16 levels for rate of change

Effect choice (button switch No.1 to No.4):

1, Push No.1: Automat cycling.

2, Push No. 2: Seven-color gradual cycle changing.

3. Push No.1 &2: RGB Fade in and out

4. Push No.3: Severn color jumping

5. Push No.1 & 3: RGB  jumping.

6. Push No.2 & 3: Red color.

7. Push No. 1 & 2 & 3:Green color.

8. Push No.4: Blue color.

9. Push No.1 & 4: Yellow.

10: Push No.2 & 4: Violet.

11. Push No.1 & 2 & 3: Cyan.

12. Push No.3 & 4: white.

13. Push No.1 & 3 & 4: Seven-color gradual cycle changing and jumping.

14. Push No.2 & 3 & rgb-color gradual cycle changing and jumping.

15. Push No.1 & 2 & 3 & 4: Seven-color jumping and rgb-color jumping.

Speed Choices (Button Switch No.5 to No. 8)

1. Push No.5: 0.5 second.

2. Push No.6: 1 second.

3. Push No.7: 1.5 seconds.

4. Push No.8: 2 seconds.

Decoder to use:

10位拨码

Note: FUN = OFF (the tenth code switch up) means to accept DMX512 signal mode

The first DMX address setting:
The decoder set the address bit by coding switch, of which 1-9 is for setting the start address of the Binary numeric code switch of DMX512, the first one is the lowest position, the ninth one is the highest
Bit of address code can be set to 255.

DMX512 start address code is the sum of switches 1-9, at the same time turn downside of the code switch (ON set to “1”), then the value of the bit can be gotten; coding switch up (set to “0”), the value of the bit is 0.

Example 1:
As the following Schematic 1, DMX512 start address is set to 38, encoding the No. 6,3,2 position on switch dial to “1”, others set to “0”, then the sum of the switch 1-9 code value is 32 + 4 + 2, that is the DMX512 start address 38

10位拨码38

Example 2:

As the schematic 2, DMX512 start address is set to 388, encoding the no. 2,3,6,8 switch dial to “1”, others set to “0”,, then the sum of the switch 1-8 code value is 2 + 128 + 256 = 388, that is the DMX512 start address 388.

 


Tags: ,,,,,,,,
在线客服
在线客服系统